Free All Phone Firmware Post In Cambodia: Arc Mobile Phome

Showing posts with label Arc Mobile Phome. Show all posts

Thursday, September 3, 2015

Arc Mobile Prime 402D Hard Reset, Google Account Remove, Pattern Lock, Force Close

Before you proceed flashing / hard resetting your phone / tablet make sure to back up your important files if possible. Because we care about your data.

We also suggest that your battery should be atleast 50% or better to have it fully charge, lower than the said value may cause unwanted result, such as bricking your phone / tablet rendering it unuseable. This is very important in flashing your phone / tablet. Use original USB cable as possible.

Files that you downloaded should not be corrupted, if ever the file is corrupted you might brick your phone. Or the flashing will start.

Drivers are very important specially in Spreadtrum Chipset, having an Spreadtrum SPD6610 (non android devices) driver will not work in SPD6820 (android devices).

If you are using laptop to flash your phone, make your that it has enough charge. If your laptop shutdown when your flashing your phone/tablet, you'll end up bricking your phone. Sometimes you can still recover your phone just flash it again and your phone will boot up again. But that is just a case to case basis, if your phone / tablet is deadboot (totally dead, erased all program in the chip) you can't recover it, you will need to seek professional help (technician).

In this tutorial I will gonna teach you how to hard reset your Arc Mobile Prime 402D. This can fix the following issues that you are experiencing in your phone:

1. Force Close Apps

2. If you forgot your Google Account
3. Hang in Logo

4. Pattern Lock

Ok lets do it. Just follow the procedure

1. Power off the mobile
2. Press Volume Down + Power Button Simultaneously
3. Android Recovery will appear
4. Select Wipe/Factory Data
5. Select Reboot

****Note: Sometimes you must press the power button first. Before pressing the other combination button.

That's it. Your phone will be back in its original state.

I hope this tutorial help you with your problem.

If you have any tutorial or problems in your mobile phone I will be glad to help.

- See more at: http://firmwares2you.blogspot.com/2014/07/arc-mobile-prime-402d-hard-reset-google.html#sthash.EJERjd3o.dpuf

Arc Mobile Prime 350/350D Hard Reset, Hang, Google Account Removal, Pattern Lock

Before you proceed flashing / hard resetting your phone / tablet make sure to back up your important files if possible. Because we care about your data.

Files that you downloaded should not be corrupted, if ever the file is corrupted you might brick your phone. Or the flashing will start.

Drivers are very important specially in Spreadtrum Chipset, having an Spreadtrum SPD6610 (non android devices) driver will not work in SPD6820 (android devices).

In this tutorial I will gonna teach you how to hard reset your Arc Mobile Prime 350/350D Hard Reset. This can fix the following issues that you are experiencing in your phone:

1. Force Close Apps

2. If you forgot your Google Account

3. Hang in Logo (sometimes

4. Pattern Lock

Ok lets do it. Just follow the procedure

Press and hold volume DOWN and Power Button (You must press the power button first for 2 seconds then immediately press the volume DOWN)
Android System Recovery will appear
Navigate to wipe data/factory reset (to navigate press volume DOWN, to select press Volume UP)
Select Yes – delete all user data (to navigate press volume DOWN, to select press Volume UP)
Reboot your phone

That's it your phone is back in its original state

Arc Mobile Nitro 401D firmware / stock rom to unbrick your phone

I hope this firmware can help those who are in need of this file. I've tried and tested this in a bootloop Arc Mobile 401D. Just follow the procedure below.

You can fix the following issue in your phone:

1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware

"DOWNLOAD THESE FILES"
Firmware Here -->Arc Mobile Nitro 401D Part 1

Firmware Here -->Arc Mobile Nitro 401D Part 2
Firmware Here -->Arc Mobile Nitro 401D Part 3
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

SPFlashTool --> LatestVersion

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.

Follow these steps:

Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)

"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing

1. Launch FlashTool (flash_tool.exe)

2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps

Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.

5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.

"Hard reset your phone after flashing"

Some workarounds:

If you encounter PMT_Changed error here is what you do:

In Latest version of Flashtool

Load the scatter file
Choose Format all + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing

For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.

I hope this tutorial help you. Please drop a comment if something is not clear to you.

- See more at: http://firmwares2you.blogspot.com/2015/01/arc-mobile-nitro-401d-firmware-stock.html#sthash.Jixff6O8.dpuf

his firmware is for Arc Mobile Nitro 400d

his firmware is for Arc Mobile Nitro 400d. I hope this firmware help you fix your phone. Just follow the tutorial below. I hope you understand my tutorial ;)

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)

"DOWNLOAD THESE FILES"
Firmware Here -->Arc Mobile Nitro 400d

VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

SPFlashTool --> LatestVersion

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"

Installing Driver with AutoInstaller

Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)

"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing

1. Launch FlashTool (flash_tool.exe)

2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps

Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.

"Hard reset your phone after flashing"

Some workarounds:

If you encounter PMT_Changed error here is what you do:

In Latest version of Flashtool

Load the scatter file
Choose Format all + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing

I hope this tutorial help you. Please drop a comment if something is not clear to you.

- See more at: http://firmwares2you.blogspot.com/2015/02/arc-mobile-400d-stock-rom-firmware-to.html#sthash.Du3VxMKj.dpuf

This firmware is for Arc Mobile 450qd

This firmware is for Arc Mobile 450qd, I already tried and tested this firmware.

This firmware is not yet rooted, you can use your favorite rooting application for PC such as vRoot/iRoot/Kingoroot or you can use an APK file which is Kingroot to root your device.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up

"DOWNLOAD THESE FILES"
Firmware Here -->Arc Mobile 450qd Part 1

Firmware Here -->Arc Mobile 450qd Part 2

Firmware Here -->Arc Mobile 450qd Part 3

VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

SPFlashTool --> LatestVersion

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"

"You can also use 64bit version, just disable driver signing or driver signature before installing the driver."

Installing Driver with AutoInstaller

Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)

"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing

1. Launch FlashTool (flash_tool.exe)

2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

3. After you load the file, UNCHECK PRELOADER and DSP only (Never flash preloader and DSP if available in firmware) If you can't proceed flashing without these two files then proceed at your own risk, press Press Download to Flash your Phone.

4. After you press Download Follow these steps

Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.

"Hard reset your phone after flashing"

Some workarounds:

If you encounter PMT_Changed error here is what you do:

In Latest version of Flashtool

PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.
Try Firmware upgrade
Try different version of flashtool
Try to set Format All + Download
Or try Manual Format first then Download.

If you encounter Privacy Protection Password:

Open flash_tool.exe
Load the scatter file
Goto Format Tab
Click on Format except bootloader
Press Play/Start Icon
Then remove battery
Insert the battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
After done formatting proceed in Flashing.
Goto Download tab (I assume that you loaded the scatter file already)
Uncheck PRELOADER (this is very important)
Press Download
Then remove battery
Insert Battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
Power ON the phone after flashing.
Restore your IMEI.

For Invalid IMEI (Does not work in MT6571 SoC):

Root your phone via vRoot/iRoot/Kingoroot or your preferred method in rooting you device. Your phone must be rooted first.
Download MTKDroidsTool version 2.4.8 and version 2.5.3
Enable your USB debugging in Developer Option (you also need this in rooting your phone via PC)
Okay in your PC -- Open MTKDroidstool version 2.4.8 (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
Still in Mtkdroidstool -- Click ROOT
In your phone -- A pop up dialogue will appear, just grant or allow it.
In your PC -- If root shell is granted/allowed, Click in IMEI/NVRAM tab. If it is grayed out this is the time when you open the MTKDroidsTool version 2.5.3.
Enter your original IMEI
Click Replace
Reboot your phone

- See more at: http://firmwares2you.blogspot.com/2015/05/arc-mobile-450qd-firmwarestock-rom-to.html#sthash.nZkRLTSZ.dpuf