Atlast
I am done uploading the firmware for Cherry Mobile Paladin Plus. This firmware
already have a CWM ready to flash.
The firmware is not rooted. You can however root this tablet using vRoot.
The firmware is not rooted. You can however root this tablet using vRoot.
You can fix the following issue in your device:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead device but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
Firmware
Here -->Cherry Mobile
Paladin Plus Part 2
Firmware Here -->Cherry Mobile Paladin Plus Part 3
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
Firmware Here -->Cherry Mobile Paladin Plus Part 3
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion
"Use
WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."
"I suggest to use 32bit Windows OS
for compatibility of the driver"
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:
- Turn off your device (always powered off is a must)
- Press and hold volume up or down, or you can simple press the two button.
- Insert your USB cable without releasing the VOLUME button(s).
- In your computer, it must detect your device and it will install the MTK Preloader or Mediatek USB VCOM driver.
- Repeat 1 to 4 if it does not detect your device.
- If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your device ^_^
